At High Service, the cost of a standard air-to-water heat pump installation varies from site to site, but averages 1500 €. We recommend that you contact us before purchasing an aero-thermal system to discuss important aspects such as the required capacity and equipment selection. It is important to take into account all aspects of the heat loss of the property, the location of the equipment to be installed, the possibility of integration into existing heating, cooling and pool or underfloor heating systems. Our engineers will take into account all details and offer the best solution at the best price. Rely on the professionals. We look forward to working with you!

A standard air-to-water heat pump installation varies from site to site, but on average costs 1500 € and includes the following:
- Delivery of the equipment to the site
- Work and materials required for installation, such as pipes, fittings, heating and cold water expansion tanks, plugs, safety valves, thermal insulation, etc.
- Connection of the heat pump to the heating system, provided that the supply and return pipes are connected, filled and fitted with ball valves in the technical room at a distance of no more than 2 metres from the pump
- Set-up of the heat pump and initial instruction of the purchaser
- Electrical installation work and materials up to the equipment, except for installation of the circuit breaker in the switchboard and cable laying
- Cabling for external temperature sensor
- Drilling a hole up to 68 mm in diameter through a wall up to 60 cm thick, except for walls made of reinforced concrete or rubble stone
- Connections between indoor and outdoor units (refrigerant pipework, cable) up to 5 metres.
Price does not include:
- Establishment of heating, ventilation and water supply systems
- Installation of a melt water drainage kit for the outdoor unit
- Construction of a concrete base for the outdoor unit
- Design documentation and as-built drawings
- General construction works
- Circuit breaker in electrical switchboard
- Cold water circulation pump
- Feeder cable and its routing from the electrical switchboard to the unit
- Insulation of the heating pipe
- Work outside of the installer's working hours
At an additional cost are available:
- Ground frame for the outdoor unit
- Connections between units longer than 5 metres, cable routing longer than 5 metres, pipe covering and insulation with a box